Drilling Pumpwire
Paige Pumpwire Logo

Paige Submersible Pumpwire
Flat-Unarmored Rubber Cables


600V HYDROFLEX - Flexible Rubber Submersible Pump cable
600 Volt 2 & 3/C with Ground Flexible
Flexible EPR/CPE Power & Control
Submersible Pump Cable

VOLTAGE:
600V
INSULATION: EPR - Ethylene Propylene Rubber
OUTER JACKET: CPE - Chlorinated Polyethylene Rubber
SIZES: 14 - 6 AWG 2 & 3 Conductor with Ground
TEMP DRY/WET: 90°C Dry, 90°C Wet, Min. ambient temp. -40°C
SCOPE: Extra Flexible, High Ampacity, Flat Rubber Submersible Pump Cable suitable for use within well casings for wiring deep-well submersible water pumps.
APPROVALS:  UL LOGO    RoHs Logo

600V/2kV HYDROFLEX - Flexible Rubber Submersible Pump cable

3/C with Ground EPR/CPE, Flexible Power
Submersible Pump Cable

VOLTAGE: 600V/2kV
INSULATION: EPR - Ethylene Propylene Rubber
OUTER JACKET: CPE - Chlorinated Polyethylene Rubber
SIZES: #4 - 500 MCM
TEMP DRY/WET: 90°C Dry, 90°C Wet, Min. ambient temp. -40°C
SCOPE: Extra Flexible, high ampacity, Flat Rubber Submersible Pump Cable for use within well casings for wiring
deep-well submersible water pumps, mining applications. Hydroflex is especially efficient for use in municipal
applications, cold weather and high ampacity requirements.
APPROVALS: UL LOGO    RoHs Logo   RoHs Logo


600V RUBBER SUBMERSIBLE PUMP LEAD CABLE
600 Volt 4/C 14 AWG EPR/Nitrile Submersible Pump Cable
VOLTAGE:
600V
INSULATION: EPR - Ethylene Propylene Rubber
OUTER JACKET: Nitrile
SIZES: 14 AWG
TEMP DRY/WET: 90°C Dry, 90°C Wet
SCOPE: Rubber motor lead cable meets US standards with three parallel conductors and a ground
separated by rib for easy installation. Designed to operate electrical motors underwater and bond to submersible plugs through vulcanization and epoxy/resin methods. Cable utilizes stranded coated copper conductors with ethylene propylene rubber (EPR) insulation and a Red nitrile jacket.
APPROVALS:  UL LOGO    RoHs Logo
UBMERSIBLE PUMP LEAD CABLE
600 Volt 4/C 1.5mm2 EPR/Nitrile
Submersible Pump Cable

VOLTAGE:
600V
INSULATION: EPR - Ethylene Propylene Rubber
OUTER JACKET: Nitrile
SIZES: 1.5mm2
TEMP DRY/WET: 90°C Dry, 90°C Wet
SCOPE: Rubber motor lead cable meets international standards with three parallel conductors and a ground separated by rib for easy installation. Designed to operate electrical motors underwater and bond to submersible plugs through vulcanization and epoxy/resin methods. Cable utilizes stranded coated copper conductors with ethylene propylene rubber (EPR) insulation and a Blue nitrile jacket.
APPROVALS:  UL LOGO    RoHs Logo
600V IMPACT - METHANE Pump Cable
600 Volt 3/C no Ground EPR/BLUE-NBR/PVC/TUF-HIDE
VOLTAGE:
600V
INSULATION: EPR - Ethylene Propylene Rubber
INSULATION JACKET: Blue NBR/PVC
OUTER JACKET: Clear Tuf-Hide
SIZES: 8 AWG - 2/0 AWG
TEMP DRY/WET: 90°C Dry, 75°C Wet
SCOPE: Flat submersible pump cables for use within the well casing for deep-well water pumps, off-shore applications where flexible cut resistant properties are required. Cable is integral filled to eliminate gas wicking possibilities.
APPROVALS:  UL LOGO    RoHs Logo